The Tuff Stuff® 40" bed rack is ideal for use with most roof top tents and truck beds. Our bed rack is designed to universally install directly on top of any truck bed rail using our provided pinch plates.

We offer two Bed Rack sizes

Due to this rack being universal (not made for any specific vehicle) we have included custom pinch plates that will pinch the inner lip of your bed rails. This allows the installation to be performed without drilling holes into the bed rails.

Our bed rack WILL NOT FIT if there has been a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.

Our rack uses a unique sliding center rail which allows the rack to be installed on various widths of beds from full-size Ford F350’s to mid-size Toyota’s.

For Toyota’s using the factory-installed cargo rail system, our rack will perfectly align with your rail and would require the use of custom T-nuts that can accept 3/8″ diameter bolts. These can be purchased as an addon.

  • Dimensions L/W/H: 40 x 48 x 14.5 (max-width is 68 inches)
  • Distance from bar-to-bar: 48 inches
  • Distance from top of bed rail to top of rack: 14.5"
  • Distance from top of bed rail to bottom of rack: 13"
  • Tube diameter: 1.5" (the center adjustable tube is 1.25")
  • Capacity Static: 800 lbs
  • Capacity Dynamic (Driving down the road): 650 lbs 
  • Powder-coated for a long-lasting finish and protection

Our rack uses a unique sliding center rail which allows the rack to be installed on various widths of beds from full-size Ford F350’s to mid-size Toyota’s.

For Toyota using the factory-installed cargo rail system, our rack will perfectly align with your rail and would require the use of custom T-nuts that can accept 3/8″ diameter bolts. These can be purchased as an addon.

Important:

1st generation Ford Raptor beds have no lip to attach the rack, so you will have to use nut-inserts, self-drilling screws, or anchors to install the rack on the bed.